Synthesis and Characterization of Nickel–Magnesium Catalyst Supported on Reduced Graphene Oxide

Closed

Nur Diyan Mohd Ridzuan, Maizatul Shima Shaharun, Israf Ud Din, Poppy Puspitasari

2021 Springer Proceedings in Complexity Conference paper Cited by 1 Quartile

Abstract

In this study, nickel–magnesium catalyst supported on reduced graphene oxide nanosheets was synthesized. rGO support was characterized by X-ray diffraction (XRD), surface area and porosity, and thermogravimetric analysis, and fourier-transform infrared (FTIR) and Raman spectroscopy to understand its physicochemical properties. The results revealed that the edge-oxidized rGO has high surface area (258.11 m2g−1) with approximately 36 multi graphitic layers where interlayer spacing is 0.336 nm each. High thermal stability of rGO makes it an excellent support to be used for high-temperature catalytic activity. Subsequently, rGO supported catalysts were synthesized via incipient wetness impregnation method. The amount of Ni was fixed at 20 wt% whilst Mg was varied at 0 wt% and 5 wt% relative to rGO content to assess its effect as second metal towards properties of the catalyst. X-ray diffractograms of Ni20/rGO and Ni20Mg5/rGO demonstrated formation of new peaks due to presence of NiO and NiO–MgO whereas (002) rGO peak at 26.5° does not show obvious changes, concluding the stability of rGO after the impregnation and calcination processes. Upon impregnation, the surface area and porosity of Ni20/rGO is lower than that of rGO due to dispersion of Ni metal on the rGO surface. BET surface area of Ni20Mg5/rGO catalyst further decreases to 103.95 m2g−1 due to the addition of metal content but its porosity is higher than Ni20/rGO. Hence, it is postulated that Ni and Mg metal form solid solution (NiO–MgO) on rGO nanosheets which has bigger particle size compared to NiO, lowering its penetration into rGO mesopores. © 2021, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

Affiliations

Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, Perak, Seri Iskandar, 32610, Malaysia; Department of Chemistry, College of Science and Humanity, Prince Sattam bin Abdulaziz University, Al-kharj, 16278, Saudi Arabia; Mechanical Engineering Department, State University of Malang, 5 Semarang Street, East Java, Malang, 65145, Indonesia