Applications of Graphene Nanoplatelets as Working Fluids in Photovoltaic Thermal Systems: A Review

Open

Nurul Izzati Akmal Muhamed Rafaizul, Mohd Afzanizam Mohd Rosli, Nurfarhana Salimen, Ilham Akbar Habibi, Avita Ayu Permanasari, Safarudin Gazali Herawan

2024 International Journal of Nanoelectronics and Materials Vol. 17 Issue 3 Article Cited by 3 SDG 7SDG 17 Quartile

Abstract

The application of nanofluids, specifically graphene nanoplatelets, as a working fluid in photovoltaic thermal (PV/T) has attracted much attention due to the enhanced thermophysical properties of nanofluids compared to those of conventional working fluids. In comparison to traditional fluids, nanofluid is a potential heat transfer fluid that can significantly improve system efficiency. The nanoparticle's large surface area and small size result in an increased rate of heat transmission. This review addressed the use of graphene nanoplatelets (GNP) as a working fluid in PV/T systems. Incorporating GNP into PV/T systems can attain many advantages, including enhanced thermal conductivity and increased energy conversion efficiency. The review goes through the difficulties in synthesizing and characterizing GNP and the thermophysical properties of GNP. In addition, the review highlights the experimentation on the performance of PV/T systems in terms of thermal properties that use GNP as their working fluid. The integration of graphene nanoplatelets (GNP) as a working fluid in photovoltaic thermal (PV/T) systems holds immense promise for enhancing system efficiency and energy conversion rates. The demonstrated benefits of GNP, including its superior thermal conductivity and increased heat transmission efficiency, underscore its potential as a key component in advancing PV/T technology. The reviews concluded that the composition of 0.5 wt.% with a ratio of 1:1 to the surfactant shows the best formulation and can achieve good dispersion of the nanofluid. © 2024, Universiti Malaysia Perlis. All rights reserved.

Affiliations

Faculty of Mechanical Technology and Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Melaka, Durian Tunggal, 76100, Malaysia; Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Negeri Malang, Semarang 5, East Java, Malang, 65145, Indonesia; Centre of Advanced Material for Renewable Energy (CAMRY), Universitas Negeri Malang, Semarang 5, East Java, Malang, 65145, Indonesia; Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta, 11430, Indonesia

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock