Y.E. Gunanto, M.P. Izaak, H. Sitompul, Y. Taryana, A. Mulyawan, J. Setiawan, Y. Yunasfi, W.A. Adi, A. Taufiq, R. Ramlan
This paper reports an increase in the ability to absorb microwaves from a composite made of combination between soft and hard magnetic materials, perovskite material, and an epoxy as matrix of composite, Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy (NBFE) with a wt% ratio of 5:3:2:10. Composite samples were made using the mechanical alloying method with milling techniques and sintered at a temperature of 1000 °C for 5 h. NBFE composites were studied to increase the ability to absorb microwaves at 2-18 GHz frequencies with thickness variations of 1 mm and 2 mm. The results obtained, the composite sample Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy has the ability to absorb microwaves with the best reflection loss value −37.47 dB with a bandwidth almost reaches 11.32 GHz in the 2-18 GHz frequency range. © 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.
Department of Physics Education, Faculty of Education, University of Pelita Harapan, Karawaci, Tangerang, 15811, Indonesia; Research Center for Telecommunication, National Research and Innovation Agency, Indonesia; Research Center for Advanced Materials, National Research and Innovation Agency, Kawasan Sains Teknologi B.J. Habibie, Serpong, 15314, Indonesia; Department of Electrical Engineering, Pamulang University, South Tangerang, Serpong, Indonesia; Department of Physics, Malang State University, East Java, Malang, Indonesia; Department of Physics, Sriwijaya University, South Sumatera, Palembang, 30152, Indonesia
